Customizable Pure Water Treatment System with 600L/H Capacity

Customizability Pure Water Treatment System - Low Temperature Evaporator

1 . Descriptions:

The cryogenic evaporator is an advanced vacuum evaporator utilising heat pump technology, designed for efficient and fully automatic continuous operation. It is particularly suitable for the treatment of water-soluble wastewater and can be used in conjunction with pure water treatment systems to further improve water purity. It maintains evaporation temperatures between 28-30 degrees Celsius, minimising scale formation and eliminating the need for flocculation prior to evaporation. The system can handle evaporation volumes from 100 to 20,000 litres per day and offers fully automatic, unattended operation with remote wireless monitoring. The system operates under a vacuum of approximately 0.1 kPa, ensuring high energy-efficient performance and low evaporation temperatures, while supporting the pure water treatment system.

2 . Product parameters:

3 . Specificities:

1.Plug and play,no need for additional equipment such as steam boliers and cold water towers;

2.Make full use of the air energy of the heat pump.Compared with the traditional steam or electric heating evaporation technology,the heat pump evaporation technology greatly reduces the energy consumption;

3.Ultra-low temperature evaporation.The vacuum degree is above-0.095Mpa,and the evaporation temperature is 35-45℃.More suitable for heat-sensitive materials.For corrosive materials,the corrosion degree of the equipment is minimized,and the equipment life is greatly prolonged compared with the traditional evaporator;

4.Ultra-low temperature evaporation reduces the scaling coefficient,which is more suitable for the evaporation reduces the scaling coefficient,which is more suitable for the evaporationand concentration of materials that are prone to scaling;

5.Modular design.The equipment has a compact structure,small footprint,quick and convenient assembly and operation,and quiet operation;

6.Fully automatic control,one-key start,qutomatic feeding,automatic discharging,automatic addition of defoamer,alarm when material is cut off,unattended for 24 hours;

7.Low failure rate,stable operation,convenient maintenance and low maintenance cost;